The PCV hose routing was changed from the original routing. The way it is setup now, the two ports on the right valve cover go to a T at the . Intake,throttle body, and pcv routing questionspostsJun 2012Better flowing LSPCV setup?
LSto LSPCV conversion - LS1Howto. All 2001+ LS1's will have this, and any LS1's that have upgraded to . I don't remember the way some of the hoses went on. I'm referring to the ones on the intake manifold and pcv system. Pic 3: Fresh air inlet to the valve cover, needs to be routed in front of the Throttle . Anyone have a diagram or clear picture of the routing of the hose from the PCV valve on the drivers side of the intake manifold to the . Urgent Installing a catch can: Would that solve the oil.
Installation and explanation of a PCV catch can on a LS engine. Ive ran a catch can in the past with the valve cover pcv setup. Also the bundle of BS hoses around the back of.
Sep 20- I am putting an LSintake on my 5. I am not sure if my plan for the PCV hose routing is 1 correct. My drivers side valve cover has the .
That hose routes crankcase vapors from the driver's side valve cover. It's exactly like on the original pic, that is for 97-LSPCV system. His LShad a nipple on the driver side valve cover, which ran a hose behind the intake to another.
Their PCV routing is totally different.
No comments:
Post a Comment
Note: only a member of this blog may post a comment.