Multiport valve positions

Multiport valve settings can be confusing, especially if you don't know what a multiport valve is to begin with. The multiport valve is found on most sand filters and . The video above will teach you how to use a multiport valve and what all the settings do and how to use them.

How to Use a Multiport Valve on a Sand Filter. MULTIPORT VALVE COVER POSITIONS FILTER: Keep it here of the time, except when backwashing, rinsing or wasting. Sand and DE filters use a multiport valve primarily to help clean or.

A typical multiport valve has settings.

Here is the typical Multiport valve on most Sand Filters. This is another thing that could cause problems with. WASTE: In this position the pool water is pumped through the multiport valve direct to the waste line, bypassing the sand bed. Mar 20- Learn what a Multiport is and how to use the different Positions or settings to get the most out of your swimming pool filter.

Today we look at Multiport Valves, defining the valve functions, or valve settings to know which to use, and when and . PUMP OFF BEFORE SERVICING OR CHANGING VALVE POSITIONS. CAUTION: TURN PUMP OFF BEFORE SERVICING OR CHANGING VALVE POSITIONS. Shut off pump motor and move multiport valve handle to RINSE position. Shut off pump again, and move handle back to .

So lets say you are looking at your sand filter multi-port valve right now. You should have about settings including: Filter Backwash Re-circulate. Hi Rob and welcome to the Pool Care Forums Typically a multiport valve has positions and one all open position.

I have an issue with the multiport valve positions, I moved them around somehow and now the spa is empty, how are they suppost to go, I am . In order to change a valve setting, the pump must be off. The valve should only be turned in the clockwise position regardless of location of next position setting. Mar 20- The multiport valve is a swimming pool systems most important.

For a sand filter, the handle when in the FILTER position will point at the filter . CLOSED — Valve may be set in closed position when servicing filter tanks located below water level.